November 2014
Volume 10, Issue 11

Practice Must Haves

Gerard Kugel, DMD, MS, PhD

Dentists are overwhelmed with options in materials and techniques. Manufacturers are constantly introducing “new and improved” materials. These materials are often introduced with little evidence to support their claims. There are publications dedicated to product evaluation that can help, along with the feedback of key opinion leaders, but we need to do more. Product research—in vitro studies and others—that is funded by larger corporations with reputable research facilities can be usually trusted, but is always better if it is duplicated independently.

Before you change products or techniques in clinical practice, it is important to spend some time evaluating the material or device. Take a critical look at its composition and examine the information provided by the manufacturer along with what is available in the literature. I am often surprised how many products that become popular have so little bench or clinical data. There have been a number of instances where a material has become very popular and it was later found to be a major clinical failure. Very few products I see introduced to dentistry have any clinical data and even fewer have any long-term clinical data.

I also suggest thinking about your own motivations for switching to a new product. Do you really need it? Is your current product working well? If yes, why are you switching? If not, what do you need and expect from a new product in that category? We need to avoid the urge to be the first on our block to work with a material just because it is a new. I am also not suggesting you be last on the block. I believe that common sense, some review of the evidence, and own our clinical judgment and evaluation can make a world of difference.

As I said a number of years ago in an interview, it’s easy to see the attraction of new products, but it’s important to remember what’s really critical—and that’s technique. New materials help the profession. But some practitioners are too concerned with switching to a new material and not concerned enough with doing the procedure correctly. The reality is, when there is a failure in dentistry, the majority of the time it’s the technique or the operator that failed.

Elizabeth M. Bakeman, DDS

Digital Camera

The shutter froze recently in my Nikon D100 (a work horse for the past 10 years) and I felt like I had lost the use of my right hand—that is how indispensable a digital camera is to my practice. I was simply paralyzed without a camera. We use our digital camera for:

A basic set of images on all new patients (full face, frontal smile, retracted frontal view, and upper and lower occlusal images)

A diagnostic series of images for patients in need of restorative dentistry (a series of 20 images that aid in diagnosis and treatment planning)

Evaluating provisional restorations

Shade and contour communication to the lab

Monitoring lumps and bumps

Postoperative images

Patient communication

Marketing

Educating ourselves and others

I purchased a Nikon D70 and also had my D100 repaired as a backup. I never again want to be a day in practice without a quality digital camera. It is by far the most used and valuable piece of equipment in our office.

Electric Waxer

I love my Kerr electric waxer! Long gone are the days of an open flame and setting my hair on fire—never a good smell with which to infuse the office!

I perform the vast majority of my diagnostic wax-ups for the restorative dentistry I do. I feel waxing up the case aids in my treatment planning as well as my ability to execute the dentistry clinically. Performing the wax-up has not only improved my ability in the area of indirect restorations but also increased my knowledge of tooth shapes, arrangement, and morphology, which translates to improved skill with direct composite restorations and in the refinement of provisional restorations.

The waxer heats up at a moment’s notice, and is easy to use, dependable, and portable. I wax at the office but I also pack up my models, articulator, waxer, carver, and a tub of wax, and wax at home in the evenings. Years past, I spent many a night waxing at the kitchen table while my daughters were doing their homework. My daughters are out on their own now, but there are still nights I get home and my husband and I sit and talk while I wax.

In addition to diagnostic protocols, we frequently employ the waxer at the office when a patient breaks a tooth. The assistant takes an impression, pours the impression in quick-set stone and then uses the waxer to restore lost tooth shape before making a matrix in which to make the provisional restoration. It is a customized, fast, and easy technique. An electric waxer is an affordable and indispensable piece of equipment that no office should be without.

Dr. Bakeman is an accredited fellow of the American Academy of Cosmetic Dentistry, an adjunct faculty member of the Kois Center in Seattle, and maintains a full-time private practice in Grand Rapids, Michigan.

Gerard Kugel, DMD, MS, PhD

Electric Handpiece

One of the most important changes to my practice in the past 15 years has been the introduction of the electric handpiece. I believe it has allowed me to do better dentistry for many reasons. My preparations are more precise with as a result of the constant torque. This allows me to have better control with the added benefit of less noise and chatter while drilling. The benefits are quite evident when cutting off an e.max® (Ivoclar Vivadent) or zirconia crown.

Microetcher (Intraoral Sandblaster)

I use my microetcher every day I am in practice. I use it for etching all metals, composites, and amalgam for maximum bond strength, especially in emergency repairs. I use it for intraoral porcelain repair, cleaning dark grooves to reveal decay, and removing temporary and or permanent cement. It can be used to remove composite cement from failed bonded restorations, which might allow you to rebond the crown or veneer. It is possible to use your microetcher for prepping pit and fissure restorations as well as small incipient lesions. Couldn’t live without it.

Loupes

If there were one item in my practice that I definitely could not live without, it would have to be my loupes. When I was younger I thought that I would never need to use magnification, and then suddenly at 40 I realized I could not see the way I used to. I started with the 2.5 magnifications and now I have to use the 4.8 loupes. I might add I have the micro headlight, which is also a must have for me. I teach at a dental school and we require the students to use magnification for all preclinical and clinical procedures. When a dentist that tells me they don’t need to see better, I tell them they are crazy.

Isolite

Compared to traditional forms of isolation, such as the rubber dam or manual suction and retraction, Isolite (Isolite Systems) offers significant advantages. It keeps the working field as dry as a rubber dam, but it is easier and faster. I do a significant number of bonded restorations, and keeping the field dry will improve their longevity. I will say there is a short learning curve with this device, but once you are familiar with the sizing and placement, you will not do a composite without it. I also use it for crown preparation.

Dr. Kugel is dean for research, department of prosthodontics and operative dentistry at Tufts University School of Dental Medicine and editor-in-chief of Inside Dentistry. He is also in private practice in Boston, Massachusetts.

Robert Margeas, DDS

In my dental practice, there are a number of products I use on a daily basis that if they were taken away from me, I would have a difficult time practicing at the highest level.

Diamond Bur

I need a great diamond bur to prepare my teeth with not only speed and precision, but also without clogging or causing trauma to the tooth. This new diamond bur called DuraBraze from Brasseler hit the market this past year. The spot brazing of the diamond allows more spacing between the crystals and more consistent cutting edges. This allows for minimal clogging and higher cutting performance. The bulk tooth reduction will be smoother and more precise. Used in an electric handpiece, there is no better diamond on the market.

Magnification

Another product that I could not work without are my loupes or dental magnification glasses. I was fortunate to start using magnification right out of dental school and have never looked back. I did not wear magnification throughout my training but saw the benefits at a dental meeting after graduation. I currently use 4.5 expanded field dental telescopes from Designs for Vision. This is a company that has been around for over 50 years, and is known for making the highest quality products. I would encourage all dentists to use magnification and gradually work their way up to the higher power loupes.

Electric Handpiece

The final product that makes my practice efficient and performing at a high level is my electric handpiece. Once again, I was very fortunate to meet Arthur Mateen in 1995 at the Chicago Midwinter Meeting and he convinced me to try the Bien-Air electric handpiece. It was a welcome change to the old air-driven handpiece. I realized they could prepare teeth with high torque without stalling out. This not only increased my efficiency, but also created precision margins. I love the fact you can dial down the speed so that the final margins can be planed to a very smooth finish. Having the ability to control the torque also helps with creating surface texturing when finishing composite resins.

Dr. Margeas is an
adjunct professor in the department of operative dentistry at the University of Iowa College of Dentistry in Iowa City, Iowa. He is also in private practice in Des Moines, Iowa.Amanda Seay, DDS

Amanda Seay, DDS

Narrowing it down to three products that I cannot live without is really tough. I have some favorite composites, bonding agents, burs, handpieces, etc, but the truth of the matter is there are many high-quality products on the market from several manufacturers that I can implement into my practice and get predictable results. I looked at this from the perspective of what has changed how I practice and the outcome of what I do. That being said, here are my three “can’t-live-without” products.

Canon 70D Camera

Canon 70D with 100-mm macro lens and 270EX II speed lite. I have had a camera since the day I started practicing dentistry and I cannot imagine life without it. From new patient photos and patient education to diagnosis and treatment planning, lab communication, and esthetics. Being able to see a photo on a large computer screen gives you an ability to see things from a different perspective than from behind the patient’s head in the chair. I take photos every single day.

Almore Shimstock Strip

Unglamorous as it may seem, it also happens to be the one thing that has given me the most predictability when it comes to doing my entire restorative needs. Whether it is doing one-unit restorations, full mouth rehabilitation, or equilibrations, it has decreased the number of postoperative adjustments tremendously. Even the thinnest occlusal paper cannot predictably let you know the difference in intensity and that little bit can make all the difference in some patients.

Hygienic Non-Latex Dental Dam

Again. Basic. Boring even. The truth is I am more efficient and work more effectively when a rubber dam is on. Whether prepping, filling, or seating a case, all of these procedures get a rubber dam in my office. I am not dealing with tongue, cheek, or moisture. Patients are actually more comfortable as well, and my intraoral time decreases significantly. My assistant also prefers to assist with rubber dam on. A plus for me, the patient, and my assistant equals a no-brainer in the practice.

Dr. Seay maintains a private practice in Mount Pleasant, South Carolina. Since graduating from New York University College of Dentistry in 2002, Dr. Seay has continued to expand her base of dental knowledge and skills through continuing education and advanced training. Dr. Seay shares her knowledge as a Kois Clinical Instructor in Seattle. Additionally, she has published articles covering the art and techniques of esthetic dentistry and serves on the boards of several peer-reviewed journals. She was nominated as one the Top 25 Women in Dentistry in 2012 and is an accredited member of the American Academy of Cosmetic Dentistry.

Michael Sonick, DMD, and Rui Ma, DMD

The following are our essential products for the periodontal/surgical practice.

GEM 21S

GEM 21S (Osteohealth) is a growth factor–enhanced matrix consisting of a bioactive protein rhPDGF (recombinant human platelet derived growth factor) and an osteoconductive matrix β-TCP (beta-tricalcium phosphate). One of the main ingredients, PDGF, is an important mediator of wound healing, stimulating chemotactic migration of PDL fibroblasts, cell proliferation, collagen matrix formation, and angiogenesis. GEM 21S has been FDA approved for treating intrabony and furcation periodontal defect as well as gingival recession associated with periodontal defects. It recently has also been shown to increase the rate at which viable bone forms following bone grafting.

Cut-Trol

Cut-Trol (KISCO Dental) is a ferric sulfate hemostatic product. It effectively stops bleeding in a short amount of time and is gentle to both hard and soft tissue. To apply, a cotton swab is dipped into the solution and swabbed on the bleeding site or a small amount is drawn into a sterile tuberculin syringe and applied gently. Due to its unique characterizes, Cut-Trol is widely used in many day-to-day dental procedures, such as dental impressions and dental and implant surgeries. It is found to be a very useful adjunct in controlling hemostasis following the palatal harvest of a connective tissue graft.

Piezosurgery

Piezoelectric surgery, or piezosurgery for short, is a process that uses controlled three-dimensional ultrasonic micro-vibration to cut bone tissues. Its unique design and cutting action provide ultimate surgical precision and high intra-operative visibility, while the selective cutting action allows surgeons to cut mineralized tissue while minimizing trauma to the soft tissues. While it is widely used in medical field, piezosurgery also demonstrates its excellent usage in dental surgeries, such as osseous surgery, extraction and ridge augmentation, bone graft harvesting and sinus surgery.

Dr. Michael Sonick is a full-time practicing periodontist and implant surgeon in Fairfield, Connecticut. He currently is a guest lecturer at New York University School of Dentistry and the University of Connecticut School Of Dental Medicine. He is on numerous editorial boards and is co-editor of the textbook Implant Site Development.

Dr. Rui Ma is a full-time practicing periodontist and implant surgeon in Fairfield, Connecticut. He attended the State University of New York in Albany where he attained a bachelor of science in Chemistry. He continued at Tufts University to complete his dental degree. He completed his periodontal residency at Stony Brook University.

Theodore P. Croll, DDS

Vitrebond Plus Base Liner

Vitrebond Plus Base Liner (3M ESPE) is a resin-modified glass-ionomer cement that was first introduced as Vitrabond in the late 1980s and renamed Vitrebond, soon after. It is a splendid direct-application dentin replacement material and has proven itself to be invaluable in direct-application stratification tooth repair. This material chemically bonds to tooth structure, releases fluoride ions which have an internal antibacterial effect, reduces microleakage significantly, and in my experience of more than 25 years using the product, eliminates all postoperative tooth sensitivity. I consider Vitrebond Plus indispensible for dentin replacement in direct-application adhesively bonded tooth repair.

Enamelon Preventive Treatment Gel

Enamelon Preventive Treatment Gel (Premier Dental Products) is a new, nonprescription, stannous fluoride brush-on preventive product containing calcium and phosphate salts that has shown good early acceptance by patients and parents. New research has shown that with a significantly lower fluoride concentration and amorphous calcium phosphate technology to enhance remineralization, the pleasant-tasting gel gives much better fluoride uptake and resistance of enamel surfaces to acid challenge than sodium fluoride prescription dentifrices. Even though it is new to the marketplace, the initial research is extremely promising as to its potential to protect against caries, decrease sensitivity of dentin, and reduce gingivitis. It may be premature to designate this remarkable gel as a long-term “must have” in my practice, but these remarkable attributes do not appear to be accompanied by any disadvantages.

Preformed Stainless Steel Crowns

Preformed stainless steel crowns (3M ESPE) are indispensable to pediatric dentists and general dentists who treat children. These crown forms, with wide variation in sizes, have been developed with high-quality stainless steel and closely replicate the anatomic design of natural teeth. When tooth preparation of a primary molar is proper and a stainless steel crown form is adapted and luted correctly, occlusion, masticatory function, and spatial relationships are regained, with a virtual guarantee that caries will no longer affect the treated tooth. In addition, the permanent molar crown forms, also by 3M ESPE, are ideal for interim full coronal coverage of permanent molars until long-term repair with precision cast metal or ceramic crowns can be considered in the adult years. Many permanent posterior teeth that are designated for extraction due to severity of damage or financial considerations could be saved with judicious use of these permanent molar crown forms. Severely hypoplastic or hypocalcified permanent first and second molars can also be restored for extended periods of time with the 3M ESPE stainless steel crowns.

Dr. Croll is a diplomate of the American Board of Pediatric Dentistry, practicing in Doylestown, Pennsylvania, since 1978. Currently, he serves as adjunctive clinical professor of pediatric dentistry at the University of Texas Health Science Center in San Antonio, Texas, and affiliate professor of pediatric dentistry at University of Washington School of Dentistry (Seattle). Dr. Croll has no current financial interest in the products or companies mentioned in this writing.

In Search of Must Haves

The Top 5 most viewed products on InsideDentalProducts.com in each category.

+ Adhesives/Bonding

Product Company

ALL-BOND UNIVERSAL BISCO

Brush&Bond Parkell

BeautiBond Shofu

Bond Heraeus Kulzer

Adhese Universal Ivoclar Vivadent Inc.

+ Burs/Diamonds

Product Company

Peter Brasseler Series Diamonds Brasseler

Dialite Diamonds Brasseler

Winter Restorative Design Prep Kit Brasseler

KOMET ZR-Diamonds Komet

DuraBraze Brasseler

+ Composites

Product Company

TheraCal LC BISCO

HRi Synca

SonicFill Kerr

BEAUTIFIL Flow Plus Shofu

Filtek Dental Restorative 3M ESPE

+ Cement

Product Company

eCEMENT BISCO

BisCEM BISCO

MonoCem Shofu

Duo-Link Universial BISCO

BeautiCem Shofu

+ CAD/CAM Equipment

Product Company

CEREC AC w/ Omnicam Sirona

CAM 5-S1 VHF

Planmeca PlanScan E4D

OneVisit Benco

CEREC MC XL Sirona

+ Diagnostic Equipment/Accessories

Product Company

Fingertip Pulse Oximeter Henry Schein

T-Scan Tekscan

Massad DEFSR Nobilium

CariVu DEXIS

Microlux - Fiber Optic Perio Probe AdDent

+ Digital Imaging: Intraoral Sensors

Product Company

Smile Designer Pro Tasty Tech

Schick 33 Schick

Sensibles Flow Dental

AimRight Schick

NOMAD Pro 2 NOMAD

+ Digital Imaging: Panoramic X-Ray

Product Company

Orthopantomograph OP30 Instrumentarium

SCANORA 3Dx SOREDEX

Bel-Cypher Digital Panoramic X-ray Belmont Equpiment

CS 9300 Carestream Dental

Hyperion X9 MyRay

+ Endodontics

Product Company

EndoSequence RRM Brasseler

EndoSequence BC Sealer Brasseler

EndoSequence 2 Cordless Brasseler

Foramatron Parkell

BioRaCe Brasseler

+ Handpieces/Contra Angles

Product Company

Forza L50K Lab Motor Brasseler

Sterling High Speed Fiber Optic Benco Dental

StarDental 430 Series DentalEZ Dental

Acclean Hygienist Handpiece Henry Schein

Forza ELM Brasseler

+ Implants

Product Company

NobelActive Nobel

AnyRidge Implant System IDS

Implant Abutment System Rhein83

SMARTbuilder Hiossen

3D Click Guide Idondivi, Inc

+ Impression Materials/Accessories

Product Company

Blu-Bite HP Henry Schein

Affinity Clinician's Choice

Cinch VPS Parkell

FlexiTime Heraeus Kulzer

Alginate Impression Material Harry J. Bosworth

+ Practice/Business Management Tools

Product Company

iDentalSoft iServiceSoft

1-800-Dentist Futuredontics

Axex Dental UniDent Software Co.

FireCR Dental Reader 3DISC Imaging

Aquarium Software Dolphin Imaging

© 2016 AEGIS Communications | Privacy Policy