Don't miss a digital issue! Renew/subscribe for FREE today.
×
Inside Dentistry
December 2016
Volume 12, Issue 12

Cybird Gold Fourth Generation Curing Light

Diverse and Powerful Technology for Clinicians’ Needs

Figure 1 | Modern dental materials require effective, complete, and reliable polymerization. The Dual-Band LED mounted Cybird Gold was specially developed to photopolymerize a range of materials. With its powerful and efficient new design features, the Cybird Gold sets a new standard in every aspect.

The Cybird Gold’s compact and ergonomic design fits perfectly in the hand, and the Dual-Band LED makes it compatible with most resins. This fourth-generation curing light fully adjusts to different types of dental treatments and can help reduce the expense or time associated with treatment by offering one short polymerization cycle.

Various resin-based materials have different light curing requirements that depend, in part, on the wavelength of the curing light. As a result, many clinicians use multiple curing lights that are compatible with each type of resin. Considering this need of their customers, Dentazon Corporation (DXM) upgraded the design of the Cybird Gold to include a broad range of wavelengths (400 to 490 nm) with three power modes. These power modes are High Power Mode: 1,500 mW/cm2; Plasma E. mode: 2,500 mW/cm2; and Ortho mode for orthodontic bonding: 16 times of 3 seconds at 2,500 mW/cm2.

Dual-Band LED technology makes Cybird Gold convenient and easy to use for many restoration procedures. High Power Mode is appropriate for most direct clinical applications such as resins, liners, sealants, and bases, as well as indirect procedures such as veneers, inlays/onlays, and crowns. Plasma E. Mode is recommended for rapid curing and Ortho Mode is for orthodontic applications such as bonding of ceramic/metal brackets.

In existing LED curing light products, 4-chip LEDs are applied to the dome to make the short wavelengths needed for polymerization. Cybird Gold uses a chip-on-board method, where the dome is removed from the LED surface. The 9-chip LED in Cybird Gold is compatible with resins that require a wide range of wavelengths and provides better light spreading for a more thorough cure. Along with the 9-chip LED, it maintains a stable light output, facilitating heat emission during usage and minimizing the generation of heat. While the Cybird Gold maintains a lower temperature and generates less heat, it still maintains high intensity for efficient curing.

Cybird Gold includes three standard light guides—45º, 90º, and a transilluminator tip. The transilluminator tip provides a beam of white light for use in clinical diagnosis of crown fractures, canal orifices, and a visual guidance during preparation.

Dentazon Corporation (DXM) strives for excellence in supplying high-quality dental products to clinics, hospitals, and labs to obtain the best possible patient outcomes.

Product Highlights

• Lower temperature: generates low heat and still maintains high intensity for efficient curing
• 9-chip LED is compatible with resins that require a wide range of wavelengths and provides better light spreading for a more thorough cure
• Wavelength range of 400 nm to 490 nm
• Three curing modes: High Power Mode: 1,500 mW/cm²; Plasma E. Mode: 2,500 mW/cm²; Ortho Mode: 16 times of 3 seconds at 2,500 mW/cm²

For more information, contact:
Dentazon Corporation (DXM)
310-328-1600
www.dentazon.com

© 2024 BroadcastMed LLC | Privacy Policy